The same great Chugger Pump, now with Run Dry Protection. Introducing the Chugger X-Dry Series Brewing Pumps!
This Chugger Pump has so many uses around the brewhouse, you'll wonder how you ever brewed without it.
The Chugger lineup of pumps are great quality pumps at an amazing price. They have an impressive flow rate of 7 gpm, and a magnetic drive designed to handle back-pressure. They also have a 1/2" mpt inlet and outlet, allowing easy configuration for any application! When you use a Ball valve on the outflow side, you can throttle down the outgoing flow rate, allowing for more efficient sparges or cooling! The Stainless Steel Pump Head can be rotated 360 (in 90 intervals) to allow you to customize the configuration of the pump to meet the specific needs of your workstation.
This isn't just a single purpose pump. You can use it for easy transfers between kettles, to cool wort via a counterflow chiller, or to recirculate ice water for quicker chilling! Because it has so many uses, you will find brew day going a lot smoother.
Run Dry Carbon Bearing
Stainless Steel Pump Head.
Food Grade up to 250 F.
1/2" mpt inlet and outlet.
High Flow rate of 7 gpm
Max Head 18.6 ft
115v 55" cord and plug attached.
50/60 Hz, 1.4 amp
1/20 HP, 3500 RPM
No more issues with cross threading plastic heads or snapping off fittings.
Note: When using silicone tubing, we recommend using a slightly larger barb than the I.D. of the tubing. This is because silicone tubing tends to have greater pliability than most tubing. For example, when using 1/2" silicone tubing, we recommend our 5/8" barb (H620), to help ensure a better seal!