Robobrew / BrewZilla V3 All Grain Brewing System With Pump - 65L/17.1G (220V)

 
$699.95

Item #: 46601
Weight: 48LBS
Availability: In Stock

California Recipients: See Proposition 65 Information
 

Quantity:
Are you looking for an awesome, single vessel system to do 10-gallon batches?  The BrewZilla is the answer! This all-in-one electric brewery is the next generation of Robobrew units and comes with various improvements to electronics, components, handle design and many other aspects. Not brewing 10-gallon batches every brew day? No problem! The BrewZilla works just as well for 5-gallon batches, and with so much power, you'll get your temperatures up even faster. The BrewZilla features built in elements for heating and boiling, programmable mash schedule and delayed start, a built-in pump for recirculation, an onboard water-resistant control panel for setting and monitoring temperatures, a removable grain basket, and a built-in spigot for transferring.
 
To get the Wort Chiller Connection Kit for free, add the item to your cart along with the Robobrew / BrewZilla and use code ROBOKIT at checkout.
 
Automatic Step Mashing! 

One of the coolest features of the Robobrew is the ability to program the unit with up to 6 individual temperatures and durations so you can step mash precisely how you desire. Simply press the "S1-S6" button to select the stage you want to adjust, and use the temp, time and +/- buttons to program the stage. If you have less than 6 stages in your mash schedule, program the stages you want to skip with 00:00 as the time and the controller will automatically move on to the next step. When all the stages are complete, the Robobrew will sound an alarm and hold the last set temperature.

The programmable stages can also be used to set a delayed start of up to 23 hours in advance so that you can have your water hot and ready to go when you get home from work or wake up in the morning. In order to do this, fill the unit with strike water and program the controller with two steps. Step 1 should be programmed at a temperature lower than the unheated strike water (so the elements will remain off), and the duration should be programmed for however long you want the delay. Then program Step 2 with your desired strike water temperature and a duration of 1-2 hours, giving the Robobrew ample time to heat up and giving you a margin of error in case you hit the snooze button the morning of brew day.

Powerful
This very capable 15amp brewery has over 3kw of power so you can get up to boil in no time. 220V outlet required!
 
Ultra-Low Watt Density 
This brewery has been made with ultra-low watt density elements. This means less caramelization and also makes this brewery capable of producing very light beers with very little maillard effect.  This is also particularly good with high gravity beers or barley lines that can sometimes get some degree of scorching in other electric breweries with higher watt density. The lower watt density also means the elements are much easier to clean.
 
Easy to Use
This is the easiest 65L electric brewery on the market and it's dead simple to use.  Even if you have never brewed an all-grain batch before, you will pick it up in no time with this fantastic single vessel brewery.
 
Easy to Clean
Cleaning can be one of the most time-consuming aspects of all grain brewing, but with a single vessel brewery like this, cleaning is quick and easy.
 
Compact
Let's face it, we could all do with more storage space. When not in use, the BrewZilla can be packed up into a box that is 24" x 24" x 34" tall, so it only takes up a small space in your garage. You won't find a more compact brewery with this capacity anywhere else.
 

Features:

  • Stainless steel construction
  • 17 gallon total capacity with a finished beer output of 10 gallons
  • Digital temperature controller
  • 220V power
  • NEMA 6-30R plug
  • Triple heating elements for total control (2000, 1000 and 500 watts)
  • Stainless steel 1/2 in ball valve for draining (don't have to use the pump)
  • Immersion wort chiller included
  • Stainless steel malt pipe/basket
  • Stamped in volume markers
  • Glass lid
  • Magnetic drive pump for recirculation
  • Recirculation arm
  • Temperature reads in °F or °C (press and hold temp button for several seconds to adjust)
  • Approximately 36" H (with recirculation arm) x 16" D
  • You might also need:
  • 2' of 1/2" ID Silicone tubing for sparging and draining.
  • To connect included chiller: 20' of 1/2" ID tubing, 3 small hose clamps and 1 brass Garden Hose Thread by 1/2" barb adaptor.

Product Specifications

Related Products

28332

Stainless - Weldless Sight Gauge (16...
$ 59.95

47499

Ratchet Pulley for Robobrew /...
$ 12.99

48665

Robobrew / BrewZilla Wort Chiller...
$ 24.95

47553

RoboJacket - Neoprene Jacket for 65L...
$ 18.95

47904

FermZilla Conical Fermenter - 13.2...
$ 159.99

38729

High Temp Silicone Tubing (1/2 in. ID)
$ 2.45