Get adequate oxygen levels into your wort in 1-2 minutes with this Oxygenation System.
Yeast need an oxygen rich environment to thrive. After a long boil, your wort will be low in oxygen. This Oxygenation System pumps pure oxygen into your cooled wort using a disposable oxygen tank and stainless steel diffusion stone. Takes a mere 1-2 minutes of operation to achieve adequate oxygen levels. This infusion of oxygen into the wort will give you healthier yeast, a faster, stronger fermentation, and a better tasting beer.
This system comes with a regulator for disposable oxygen tank, sterile inline filter, our threaded .5 micron stainless steel oxygenation stone and tubing. Please Note: Disposable Oxygen tank is Not Included. These are available at some hardware stores. Each disposable oxygen tank will last for approximately 10-15 five gallon batches.
About the inline filters: There are two sides to the filter - an "in" and an "out". The direction you use doesn't matter, however, take note of which way you first push air through it and always keep it that way. There is an arrow on the edge of the filter housing that we use to keep the airflow going one direction when using it. The filter should never get wet, so don't dunk it in sanitizer. If you want to clean the outside of it, use Alpet D2. To store the filter, use a little tinfoil on the "In" of the filter and store in a ziplock bag.
Oxygen Regulator Features:
1/4" Barb Output
Max Delivery Pressure: 100 PSI
Max Flow Rate: 180 CFH
Regulator is Left Hand Thread
Stainless Steel Actuating Rod
Machined brass body with adjusting cap, piston and hose connection