March Nano Brewery Pump - Stainless 230V

On Sale!
$ 774.95

Item #: 12010
Weight: 25LBS
Availability: Out Of Stock

Shipping Limitation: This item does not qualify for free shipping.


This is a fantastic 230V pump for the smaller nano brewery that does not want to step up to the high price tag of a professional brewery pump but need more gallons per minute than most standard magnet drive pumps give you.  This March Nano Brewery pump has the reliability that you have come to expect from March pumps with a flow rate of 17 gallons per minute.  You have the ability to throttle back flow and use of food-grade materials where the beer is in contact with the pump.

Please note: You will need to take apart and clean this pump after every use to prevent the impeller from seizing.  To do so, take the bolts out of the pump head, remove the pump head from the pump, then take the impeller shaft and actual impeller apart. Clean well, and reassemble.

Please note: that the pump comes with a three foot cord WITHOUT a plug attached.


Statistics: Motor: 1/8HP 230v/60Hz

Max Flow: 17 G.P.M at zero head
Max Head: 27 ft. at 1 GPM
Inlet: 1" FPT
Outlet: 1/2" MPT
Pressure: Max. internal pressure is 200 psi
Temperature Range: 250F or 121.1C
Electrical: 230V 50/60HZ
HP: 0.125
KW: .093

Materials in Contact with Beer:
Polysulfone (Impeller)
Stainless Steel (Front and Rear Housing)
Buna N (O-Ring)
Ceramic (Thrust Washers)
Max. liquid temperature is 250F degrees
Max. internal pressure is 200 psi


Product Specifications

Related Products


Replacement Impeller for March Nano...


Stainless Ball Valve - 1/2 in Full Port


Stainless - 1" MPT x 1/2" FPT Bushing


Stainless - T.C. Clamp (1.5 in)