Image

FermZilla Tri-Conical Fermenter | Pressure Brewing Kit | FREE Spunding Valve | Gen 3 | 55L | 13.2G

 
$243.99

Item #: 62810
Weight: 43LBS
Availability: Out Of Stock

THIS ITEM IS ON BACKORDER
Item currently out of stock

Grab everything you need to ferment under pressure with the FermZilla Tri-Conical Fermenter and we'll toss in the BlowTie Spunding Valve for FREE!

This kit includes the 55L FermZilla Tri-Conical, ball lock cap adapters for the lid and collection container, floating dip tube with filter attachment, and the BlowTie 2 ball lock spunding valve. Everything you need to ferment under pressure, carbonate in vessel, and pressure transfer.

The FermZilla is the perfect option for brewers that want all the advantages of a conical fermenter without the price tag of a full blown stainless steel unit. It allows you to dump trub, harvest yeast, and carbonate and serve—all in one vessel! The clear PET tank allows you to visually monitor fermentation activity and is pressure rated to 2.4 Bar (34.8 psi), which means you can ferment under pressure, reducing ester and fusel alcohols in your finished beer. This also gives the ability to perform pressure transfers. If you prefer to move your finished beer to a keg or other vessel, you can do so with little to no oxygen exposure.

What's Included:
  • FermZilla 55L Tank with T.C. Butterfly Dump Valve
    • Stainless Steel Stand with Swing Handles
    • Stainless Steel Handle Assembly
    • Top Lid with PRV (35 psi)
    • Collection Container & Lid
    • 3" tri-clamp with gasket
    • 2" tri-clamp with gasket
    • 3-Piece Airlock
    • Graduation Sticker
    • Adhesive Thermometer
    • Spare Seals
  • (2) Red Ball Lock Carbonation Caps
  • (2) Yellow Ball Lock Carbonation Caps
    • Use one color for gas and one for liquid!
  • Stainless Steel Float with Silicone Dip Tube
  • Mesh Filter Attachment
  • FREE BlowTie Spunding Valve

FermZilla Specs:

  • 55 L (13.2 gal) Total Volume
  • Pressure Rated to 2.4 Bar (34.8 psi)
  • Height in Stand - 40.1"
  • Height w/ Airlock - 43.5"
  • Tank Diameter - 13.9"
  • Diameter in Stand - 15.7"
  • Lid & Collection Container Ports - 28 mm PCO 1881 threads
  • Temperature Rating:
    • When not under pressure, do not expose to liquids above 131°F
    • When under pressure, do not expose to any temperatures above 95°F*

KegLand Part Number: KB07225

*Please note that the temperature rating for the FermZilla tank is lower when using it under pressure. When not under pressure, it is perfectly safe to transfer wort into the tank below 131°F or to use hot liquids below this temp for cleaning. When under pressure, make sure to keep your fermentation temperature below 95°F and keep the fermenter in an environment that is below 95°F ambient. This is especially important when fermenting with kveik yeast. These strains are known to ferment hot if no temperature control is being used. Exceeding the temperature rating may compromise the tank, leading to a shorter life span or sudden failure to maintain pressure. Even with proper use, we recommend replacing the tank every two years.

Please note: when using the FermZilla under pressure, you must perform a water pressure check to ensure your connections are leak proof. To do this, fill your FermZilla up with water, apply at least 15 psi pressure, and check for leaks around all caps and threads.  

Pressure Stress
If you use the FermZilla to ferment under pressure, or you use CO2 to pressure transfer or force carbonate your finished beer, it is very important that you conduct semi-annual inspections of your tank. Even with perfect care, the FermZilla tank may show signs of wear from pressure stress over time. We recommend visually inspecting your tank for stress creases or other signs of wear once or twice a year. A hydro test should be conducted every two years, even if no signs of wear are found. The process is simple:

  • Fill the tank to the brim with water
  • Replace the Red PRV with a Green PRV rated to 4.5 BAR or higher
  • Pressurize the tank to 4 BAR (58 psi)
  • Check for leaks, then replace the Red PRV when finished

If leaks or potential points of failure are found, replace the tank before you continue using pressure with your FermZilla.

General Care
Taking good care of your FermZilla begins with cleaning and sanitizing the unit before and after use. The tank is made from food-grade PET, which is beautifully clear, but can be sensitive to long soaks in cleaners and acid-based sanitizers. In general, we do not recommend leaving products like PBW or StarSan soaking in the tank for more than an hour. Extended soaks have the potential to degrade the PET material and shorten the lifespan of the tank.

 

NOTE: FermZilla tanks are marked with a manufacturer’s “expiry date”. This does not indicate that the tank is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the tank be hydro tested to ensure the tank is holding pressure. Hydro test instructions are available here. You will also need the D1072 Green PRV to perform the test. If you do not plan to pressurize the fermenter, the test is not necessary.

 

 

Product Specifications