Image

FermZilla Conical Pressure Brewing Kit - 13.2 gal. / 55 L

 
On Sale!
$ 260.99
$230.99

Item #: 57010
Weight: 44LBS
Availability: Out Of Stock

Quantity:

This kit includes the 55L FermZilla Conical, ball lock cap adapters for the lid and collection container, floating dip tube with filter attachment, and the BlowTie 2 ball lock spunding valve is included for FREE. Everything one needs to ferment under pressure, carbonate in vessel, and pressure transfer.

 
The new and improved FermZilla in 55L brought to you by the critical key minds and engineers behind the original Fermentasaurus Gen 1. Although the original Fermentasaurus was revolutionary at the time of its conception, there are always areas to improve upon. This is partly due to the strong community of Fermentasaurus users who have helped push for an improved conical unitank.
 
What's Included:
  • FermZilla 55L Tank with Butterfly Dump Valve
    • Reinforced Stainless Steel Stand
    • Top Lid with PRV (35 psi)
    • 1000 ml Collection Container & Lid
    • 3-Piece Airlock
    • Graduation Sticker
    • Adhesive Thermometer
    • Strap Wrench
    • Spare Seals
  • (4) Red Ball Lock Carbonation Caps
  • Stainless Steel Float with Silicone Dip Tube
  • Mesh Filter Attachment
  • FREE BlowTie Spunding Valve

FermZilla Specs:

  • 55 L (13.2 gal) Total Volume
  • Pressure Rated to 2.4 Bar (34.8 psi)
  • Height in Stand - 40.1"
  • Height w/ Airlock - 43.5"
  • Tank Diameter - 13.9"
  • Diameter in Stand - 15.7"
  • Lid & Collection Container Ports - 28 mm PCO 1881 threads
  • Temperature Rating:
    • When not under pressure, do not expose to liquids above 131°F
    • When under pressure, do not expose to any temperatures above 95°F*

*Please note that the temperature rating for the FermZilla tank is lower when using it under pressure. When not under pressure, it is perfectly safe to transfer wort into the tank below 131°F or to use hot liquids below this temp for cleaning. When under pressure, make sure to keep your fermentation temperature below 95°F and keep the fermenter in an environment that is below 95°F ambient. This is especially important when fermenting with kveik yeast. These strains are known to ferment hot if no temperature control is being used. Exceeding the temperature rating may compromise the tank, leading to a shorter life span or sudden failure to maintain pressure. Even with proper use, we recommend replacing the tank every two years.

Care Instructions
Normal wear and tear may lead to stress marks or other potential points of failure when the tank is used under pressure. We recommend visually inspecting the unit for signs of wear every 6-12 months, and conducting a hydro test every 2 years. The  hydro test process is simple:

  • Fill the tank to the brim with water
  • Replace the Red PRV with a Green PRV rated to 4.5 BAR or higher
  • Pressurize the tank to 4 BAR (58 psi)
  • Check for leaks, then replace the Red PRV when finished

If leaks or potential points of failure are found, replace the tank before you continue using pressure with your FermZilla.

In general, we do not recommend leaving products like PBW or StarSan soaking in the tank for more than an hour. Extended soaks have the potential to degrade the PET material and shorten the lifespan of the tank.

 

 

Product Specifications

Related Products

55291

Torpedo Keg Beverage Tags (Pack of 10)
$4.95

56581

Stainless Ball Valve for FermZilla -...
$15.95

48071

Insulating Jacket for 55L FermZilla
$49.95

49033

Temp Twister Cooling Coil
$34.95

49034

FermZilla Thermowell w/ Duotight...
$9.95

52406

FermZilla Flat Twister Lid
$9.95