DigiMash Electric Brewing System w/ Recirculation Pump Kit - 65L/17.1G (220V)


Item #: 55113
Weight: 79LBS
Availability: In Stock


Electric all-grain brewing has never been so affordable! The DigiMash includes all of the necessary equipment to mash and boil all in one unit. Simply place the false bottom inside the kettle and install the malt pipe, fill with water and heat to your desired strike temperature, then add your grain and set your desired mash temperature on the digital controller. Once your mash is complete, lift up the malt pipe, drain the wort and sparge, then remove the malt pipe and proceed to boil.

The recirculation pump kit allows for constant recirculation during the mash, leading to better conversion and clarity. The pump can also be used for transferring wort to your fermenter.

Triple heating elements run off of a single 220 volt plug and have individual switches allowing for more control over the heating process. The elements are 2000w, 1000w and 500w for a combined 3500 watts! Use both when you need to ramp up the temperature quickly or only one of the elements when you want to hold a temperature.

DigiBoil Features:

  • 304 stainless steel construction
  • 17-gallon total capacity
  • Digital temperature control
  • 220V / 15A power 
  • NEMA 6-30R plug (5 ft. cord)
  • Triple heating element control (2000w, 1000w and 500w)
  • Heating elements are concealed for easy cleaning
  • 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2")
  • Stamped-in volume markers (gallons & liters)
  • Stainless lid
  • Temperature reads in °F or °C
    • With elements turned off, hold both +/- buttons to switch between °F or °C
  • External Dimensions: 29" H x 15" W (including handles)
  • Internal Dimensions: 19.5" H x 11.75" W

Mash Upgrade Includes:

  • False bottom
  • Malt pipe
  • Wire support 
  • Malt pipe handle
  • Malt pipe bottom screen

Recirculation Pump Kit Includes:

  • High temp magnetic drive pump
  • Recirculation arm with male camlock
  • Female camlock with barb fitting
  • 1/2" FPT x 1/2" barb fitting
  • 1/2" MPT x 5/8" barb fitting
  • 1/2" ball valve
  • 5 ft. length of silicone tubing
  • 4 x hose clamps
  • Plumber's tape

NOTE: Due to the size of this item, it is not eligible for international shipping.


Product Specifications

Related Products


BrewZilla Stainless Double Pulley Set


Stainless Steel Pump Head for MKII Pump


Ratchet Pulley for BrewZilla / BIAB...


BrewZilla Lift-N-Lock Pulley System


Whirlpool Arm for 35L & 65L BrewZilla


Replacement SS Immersion Chiller for...


Neoprene Jacket for BrewZilla 3.1.1 &...